Yesterday I posted some details about prep for hurricane Irene. I wanted to follow up on how the schedule is coming and add a few bits of info.
As you may have remembered, the following was my list for today:
Thursday:
-Exchange empty propane tank for grills. While I have a couple that I rotate through there is no sense in having an empty sitting around with a chance of needing it.
-Plus up on water and staples from the wholesale club for the time frame of event. While I usually fill up Klean Kanteens or Nalgenes from a filter having fresh bottled water available in smaller than gallon containers is helpful. Once the freezer and frig are stocked I fill the dead space with water. Once cool/cold they act as a buffer should the power go out.
-Plus up on any disposables that are down and add the expected time period of disruption.
-Address any issues found during walk around of structure.
-Secure any items that may be damaged by wind or water (either rain or expected flooding).
All goals were met for the day with relative ease and efficiency due to having a plan and schedule. This prevented being overwhelmed at the last minute. By the time the Virginia Department of Emergency Management announced that the Governor had declared a state of emergency via it's Facebook account the groceries and disposables had been purchased at the wholesale club and the list was half way done. No lines and less than $150 spent on items that will be used anyway. No waste.
Having VDEM as a 'Like' on Facebook allows me to keep up with info while on the move. Similar resources are likely available for your area as government agencies work to show functionality. Using social media is a much more streamlined avenue than some of the older methods such as websites, text messages, and hotlines.
In addition to seeing the VDEM updates I have kept up with Weather.com which has detailed analytics of the storm. Remember that information is power and knowing where to get that information is key to not wasting time. I like to have both objective and subjective sources. While weather prediction is an educated guess in most cases I like to view the 'charts' as well as be able to check out what the media outlets have to say.
Anyway, time to get some shut eye. Until tomorrow.
Stay Sharp,
Mike
Thursday, August 25, 2011
Wednesday, August 24, 2011
Batten the hatches
As some may have noticed APC has moved. We are now located in Richmond, VA, a couple hours in from the coast. With Irene headed up the eastern seaboard I figured it would be a good time to make a few entries about how I get ready for potential disasters that have some lead time. I don't expect us to get much out of this storm based on predicted tracks but it doesn't take much effort or money to beef up preps. I say beef up because this is in addition to preps that are already in place for unexpected disasters.
Based on our location the most likely threats include short term power outages, minor flooding, minor wind damage, and traffic on major roadways from weather related accidents and mass movement of people from the coast. There is a very good chance we won't see anything more than a slight drizzle but a few extra groceries won't hurt.
Since we do first in/first out on groceries we generally don't get much more than a week or two down on staples. Anything that doesn't spoil (fresh veggies, fruits, milk, etc) or can be frozen to extend storage is bought in quantity either when on sale or at the local wholesale buyers club. I generally pick up the fresh stuff bi-weekly unless the schedule looks busy. This keeps a good amount of food on the shelf without it going bad and it is all items that my wife and I normally eat. What does this have to do with being prepared for a disaster? This buffers us from running out of food should the power go out or the local grocery store getting crushed from a tornado. Some households have no more than the next meal and a few condiments in the frig, we strive for around 30+ days of food in regular rotation. That is not 30+ days of MREs, that is 30+ days of real food before we have to move onto other resources.
I had the opportunity as a teenager to test this theory out in a legitimate hurricane hit. Living in North Carolina when hurricane Fran came through and shut the area down for a little over a week. Power was out for eight days and roads were blocked limiting travel by vehicle. Through using a generator for a few hours a day and doing a lot of cooking on the grill we ate well which was necessary considering the days were spent clearing the knee deep foliage and 40+ trees down around our house.
So, what will I be doing to prep for the possibility of a little trouble from Irene? Nothing really exciting but things that will make life a little more comfortable should we have a few days of power being out or roads being flooded and the like.
The current forecast has Irene passing Virginia between Saturday evening and Sunday evening. So the first step, which has already been done is to develop a threat assessment. Look at what the potential interruptions to daily life will be, how severe they will be, and how to mitigate the threat. We covered those above. Next is to develop a plan with a schedule to execute those last minute preparations so you aren't running around crazy at the last minute. The point is to minimize disruption of daily life as much as possible.
Over the last few days I have been building my threat assessment with plan and schedule. The following is my schedule of plans:
Wednesday:
-Check fuel for camp stoves, grills, etc.
-Check batteries, etc.
-Check food stocks.
-Check status of misc disposables (TP, Soap, Shampoo, etc.)
-Check ammo, gear, etc.
-Review any to do list items that have been 'put off'.
-Perform a house walk around.
Thursday:
-Exchange empty propane tank for grills. While I have a couple that I rotate through there is no sense in having an empty sitting around with a chance of needing it.
-Plus up on water and staples from the wholesale club for the time frame of event. While I usually fill up Klean Kanteens or Nalgenes from a filter having fresh bottled water available in smaller than gallon containers is helpful. Once the freezer and frig are stocked I fill the dead space with water. Once cool/cold they act as a buffer should the power go out.
-Plus up on any disposables that are down and add the expected time period of disruption.
-Address any issues found during walk around of structure.
-Secure any items that may be damaged by wind or water (either rain or expected flooding).
Friday:
-Organize and inventory stocks. This is particularly important for the frig/freezer. Having an inventory will limit the number of times you have to open the unit to get food out for meals which will help to keep the cold air in and the warm air out.
-Fuel up vehicles. I would do this with a little time to spare and then top off just before the storm is about to hit. In the event a storm that isn't supposed to hit hard changes at the last minute you won't end up getting no fuel due to a run on the pumps. You also don't want to be forced into waiting in a 30 vehicle line with half a tank of gas as opposed to having the option to decide when you are down a days worth of driving from a full tank. For most that will be no more than a 1/4 tank.
Saturday Early:
-Review weather reports.
-Update threat assessment.
-Address any 'holes' in plan.
-Sweep the house for laundry and dishes. Anything that would take water to perform.
-If you have a second bath with a bath tub consider blocking the drain and filling up with water. This allows you to have water for flushing toilets or basic clean up. I would suggest cleaning the tub first.
This event is a pretty easy one for us. There is a very low risk of issue and the issues are likely short term even if we took a hard hit. No one has recommended any kind of evacuation for our area and it doesn't look like any recommendations will come out. That being said though, the model of Assess, plan/schedule, execute works whether you are expecting a direct hit or you are on the fringe of the storm path. It is the details of the plan that will change based upon your assessment.
That is all for tonight, stay tuned for how this plays out. I will try to update the blog and facebook over the next week with any updates to how preps work out and any interruptions of service from APC. Remember this is a broad view and not a step by step. Much has been glossed over since many preps for unexpected events are integrated into daily to-dos.
Stay Sharp,
Mike
Based on our location the most likely threats include short term power outages, minor flooding, minor wind damage, and traffic on major roadways from weather related accidents and mass movement of people from the coast. There is a very good chance we won't see anything more than a slight drizzle but a few extra groceries won't hurt.
Since we do first in/first out on groceries we generally don't get much more than a week or two down on staples. Anything that doesn't spoil (fresh veggies, fruits, milk, etc) or can be frozen to extend storage is bought in quantity either when on sale or at the local wholesale buyers club. I generally pick up the fresh stuff bi-weekly unless the schedule looks busy. This keeps a good amount of food on the shelf without it going bad and it is all items that my wife and I normally eat. What does this have to do with being prepared for a disaster? This buffers us from running out of food should the power go out or the local grocery store getting crushed from a tornado. Some households have no more than the next meal and a few condiments in the frig, we strive for around 30+ days of food in regular rotation. That is not 30+ days of MREs, that is 30+ days of real food before we have to move onto other resources.
I had the opportunity as a teenager to test this theory out in a legitimate hurricane hit. Living in North Carolina when hurricane Fran came through and shut the area down for a little over a week. Power was out for eight days and roads were blocked limiting travel by vehicle. Through using a generator for a few hours a day and doing a lot of cooking on the grill we ate well which was necessary considering the days were spent clearing the knee deep foliage and 40+ trees down around our house.
So, what will I be doing to prep for the possibility of a little trouble from Irene? Nothing really exciting but things that will make life a little more comfortable should we have a few days of power being out or roads being flooded and the like.
The current forecast has Irene passing Virginia between Saturday evening and Sunday evening. So the first step, which has already been done is to develop a threat assessment. Look at what the potential interruptions to daily life will be, how severe they will be, and how to mitigate the threat. We covered those above. Next is to develop a plan with a schedule to execute those last minute preparations so you aren't running around crazy at the last minute. The point is to minimize disruption of daily life as much as possible.
Over the last few days I have been building my threat assessment with plan and schedule. The following is my schedule of plans:
Wednesday:
-Check fuel for camp stoves, grills, etc.
-Check batteries, etc.
-Check food stocks.
-Check status of misc disposables (TP, Soap, Shampoo, etc.)
-Check ammo, gear, etc.
-Review any to do list items that have been 'put off'.
-Perform a house walk around.
Thursday:
-Exchange empty propane tank for grills. While I have a couple that I rotate through there is no sense in having an empty sitting around with a chance of needing it.
-Plus up on water and staples from the wholesale club for the time frame of event. While I usually fill up Klean Kanteens or Nalgenes from a filter having fresh bottled water available in smaller than gallon containers is helpful. Once the freezer and frig are stocked I fill the dead space with water. Once cool/cold they act as a buffer should the power go out.
-Plus up on any disposables that are down and add the expected time period of disruption.
-Address any issues found during walk around of structure.
-Secure any items that may be damaged by wind or water (either rain or expected flooding).
Friday:
-Organize and inventory stocks. This is particularly important for the frig/freezer. Having an inventory will limit the number of times you have to open the unit to get food out for meals which will help to keep the cold air in and the warm air out.
-Fuel up vehicles. I would do this with a little time to spare and then top off just before the storm is about to hit. In the event a storm that isn't supposed to hit hard changes at the last minute you won't end up getting no fuel due to a run on the pumps. You also don't want to be forced into waiting in a 30 vehicle line with half a tank of gas as opposed to having the option to decide when you are down a days worth of driving from a full tank. For most that will be no more than a 1/4 tank.
Saturday Early:
-Review weather reports.
-Update threat assessment.
-Address any 'holes' in plan.
-Sweep the house for laundry and dishes. Anything that would take water to perform.
-If you have a second bath with a bath tub consider blocking the drain and filling up with water. This allows you to have water for flushing toilets or basic clean up. I would suggest cleaning the tub first.
This event is a pretty easy one for us. There is a very low risk of issue and the issues are likely short term even if we took a hard hit. No one has recommended any kind of evacuation for our area and it doesn't look like any recommendations will come out. That being said though, the model of Assess, plan/schedule, execute works whether you are expecting a direct hit or you are on the fringe of the storm path. It is the details of the plan that will change based upon your assessment.
That is all for tonight, stay tuned for how this plays out. I will try to update the blog and facebook over the next week with any updates to how preps work out and any interruptions of service from APC. Remember this is a broad view and not a step by step. Much has been glossed over since many preps for unexpected events are integrated into daily to-dos.
Stay Sharp,
Mike
Thursday, August 4, 2011
Get some...
What: Multiple weapon familiarization
Where: BeaveRun Readiness Training Center
When: Aug 1-2, 2011
After taking some time off from contracting I have been looking to get back on a gig. I didn't want to show up to assessment and be the weakest link so I have begun getting back into shape and brushing up on skills that I can't do in the standard carbine/pistol/team tactics classes.
In early July I contacted 03humpalot to get an info dump on the Intermediate Machine Gun Operators Course and check on the next class date. At that time no classes were scheduled and Buck mentioned that there may be a chance for a less formal opportunity in the near future. A couple days later Buck advised that he and the staff at BRTC would be doing a couple days of range time to work on videos and photos for program development and advertising use and offered me an invitation to come up and get some time on the guns as well as a chance to check out the facility. I told him I was there and he advised on travel and lodging info.
I made my reservations at the local Holiday Inn in Beaver Falls, just a few miles from the facility (approximately 7 min drive). BeaveRun does have a special rate which will save you a couple of dollars. The town has most amenities that you would need while there for a class including a number of good mom and pop restaurants, a Walmart, and a number of gas stations and liquor/beer shops. I did see a gun store about a mile from the facility but didn't have time to drop in so not sure how much they have to offer in the way of last minute ammo needs or the like.
TD 1 was scheduled to start at 0900 in the class room. Directions to the facility were easy to navigate and when I arrived at the complex I checked in at the 'ECP' with security and was directed to the training building. I was a few minutes early and Buck and staff were there with Tacman71 and Wayneard were already there linking some PKM belts and catching up on old times.
We loaded up the little bit of gear that wasn't already staged at the range and headed out. Once on the range we setup some targets Tacman71 (Rob Tackett) had brought up to be used and setup a variety of 'areas' on the range to allow for shooting pistols, carbines, and machineguns on the range without conflict. While there are a number of ranges at the facility we worked on the 100m range which has (from memory) a covered concrete pad with integrated work areas at the primary firing line as well as concrete pads on the left side of the range at 25m, 50m, and 75m, allowing a variety of layouts for specific points of instruction. The entire range has a deep layer of crushed stone to allow for drainage and fight flooding when the weather turns wet. The berms are high and basically cut into a large hillside.
The range has ample target stands for paper and quite a bit of steel to allow for a wide variety of instruction and exercises.
Once on the range Buck took a solid couple hours to go over the 249 and 240B platforms with me. Having used these on previous contracts but not getting a lot of time on them I had a very basic knowledge of the platforms but had (and still have) a lot to learn. We covered the following (I am sure I am leaving something out):
-Concept of the system and how it is best applied
-Tear down, inspection points, and reassembly (user level) and function checks
-Lube points/pre-mission checks
-Setting the gun up for success for various missions as well as how to setup your gear for success (slings, belted ammo, emergency mag, etc)
-BZO
-Platform options including the fixed and adjustable stock, standard and parasaw barrels, adjustable and fixed gas systems, iron sights and optics
-Mission application (vehicles, on foot PSD, on foot patrol, static op/lp, QRF, ambush) and adaption.
-Loading/unloading
-Malfunction clearance and IADs
-Barrel changes
-Application of fire on target as a solo gun and in teams
-Rates of fire, bursts, barrel life
After discussing and practicing dry these things I got behind the platforms and we went through a number of drills to get the hands on and a feel for firing them from various positions.
In addition to the 240/249 Buck also brought out his personal PKM and went through the operation of that and we got a chance to shoot it as well. He has done some significant mods to it and it is a nice piece of hardware with quite a bit of weight reduction. Given the opportunity to customize one down range I would really like to set one up similar to his.
I easily reached all the goals I had set for getting familiar with systems and then some. Buck definitely knows his stuff and has the ability to communicate it.
Later in TD 1 we ran some pistol and carbine drills, shooting on the copious amounts of steel on the range and generally having a good time shooting a variety of guns that everyone had brought out including an M203. Buck ran through a run down on the 203 and we all got a chance to shoot quite a bit of training and practice rounds with a little competition to see who could get the most hits on steel at 100m.
Around 1700 we shut down for the day, packed gear, and headed off to clean up and have chow.
The next morning we hit the range again running more time on the guns and get video and photos of specific skills and procedures including running some vehicle down drills.
In addition to another solid day of shooting the 249/240B/203 Buck broke out a M24A1 with AAC (IIRC) can and everyone took turns shooting it as well. I am not much of a precision gun guy, I have one IBA bolt gun, but that SWS was pretty slick. We also rounded out with some more drills and general shooting.
I wan't to say thanks to Buck and Aaron from BRTC, Rob from Tacstrike, Wayneard, Mark S, Mark T, and the rest of the guys that came out. I learned a lot and had a kick ass time.
I hit the road after dinner on the 2nd and didn't get all the files but look for some pics and vids to follow.
In closing, be sure to check out BRTC and the classes they have to offer. The facility is great and the staff are knowledgeable and passionate about the work they do. A great combination.
Pics and Videos:
Early in the day, the pile kept growing...
Buck running the SAW
Rob on the PKM
Putting the 203 to work
Vehicle Counter Assault Drill (Static camera)
Vehicle Counter Assault Drill (CAT SAW Gunner helmet cam)
Buck testing out a new machinegunner go
bag from EGGROLL
On the note of steel...
I do not remember how many pieces Rob brought down for us to shoot but I would venture to say that spread across the 5-10 targets we cumulatively put 10-15k rounds (a lot of it being green tip 5.56) on the targets, most of it through the 249. All of them held up extremely well with zero plate penetrations and minimal pock marks.
As you can see in the vids a number of drills put us pretty close with excellent durability on the target side and no splash or spall on the shooter side.
We literally did everything we could with guns and the 203 to try and destroy them and they weathered the storm.
Until next time...
Stay sharp,
Mike
Where: BeaveRun Readiness Training Center
When: Aug 1-2, 2011
After taking some time off from contracting I have been looking to get back on a gig. I didn't want to show up to assessment and be the weakest link so I have begun getting back into shape and brushing up on skills that I can't do in the standard carbine/pistol/team tactics classes.
In early July I contacted 03humpalot to get an info dump on the Intermediate Machine Gun Operators Course and check on the next class date. At that time no classes were scheduled and Buck mentioned that there may be a chance for a less formal opportunity in the near future. A couple days later Buck advised that he and the staff at BRTC would be doing a couple days of range time to work on videos and photos for program development and advertising use and offered me an invitation to come up and get some time on the guns as well as a chance to check out the facility. I told him I was there and he advised on travel and lodging info.
I made my reservations at the local Holiday Inn in Beaver Falls, just a few miles from the facility (approximately 7 min drive). BeaveRun does have a special rate which will save you a couple of dollars. The town has most amenities that you would need while there for a class including a number of good mom and pop restaurants, a Walmart, and a number of gas stations and liquor/beer shops. I did see a gun store about a mile from the facility but didn't have time to drop in so not sure how much they have to offer in the way of last minute ammo needs or the like.
TD 1 was scheduled to start at 0900 in the class room. Directions to the facility were easy to navigate and when I arrived at the complex I checked in at the 'ECP' with security and was directed to the training building. I was a few minutes early and Buck and staff were there with Tacman71 and Wayneard were already there linking some PKM belts and catching up on old times.
We loaded up the little bit of gear that wasn't already staged at the range and headed out. Once on the range we setup some targets Tacman71 (Rob Tackett) had brought up to be used and setup a variety of 'areas' on the range to allow for shooting pistols, carbines, and machineguns on the range without conflict. While there are a number of ranges at the facility we worked on the 100m range which has (from memory) a covered concrete pad with integrated work areas at the primary firing line as well as concrete pads on the left side of the range at 25m, 50m, and 75m, allowing a variety of layouts for specific points of instruction. The entire range has a deep layer of crushed stone to allow for drainage and fight flooding when the weather turns wet. The berms are high and basically cut into a large hillside.
The range has ample target stands for paper and quite a bit of steel to allow for a wide variety of instruction and exercises.
Once on the range Buck took a solid couple hours to go over the 249 and 240B platforms with me. Having used these on previous contracts but not getting a lot of time on them I had a very basic knowledge of the platforms but had (and still have) a lot to learn. We covered the following (I am sure I am leaving something out):
-Concept of the system and how it is best applied
-Tear down, inspection points, and reassembly (user level) and function checks
-Lube points/pre-mission checks
-Setting the gun up for success for various missions as well as how to setup your gear for success (slings, belted ammo, emergency mag, etc)
-BZO
-Platform options including the fixed and adjustable stock, standard and parasaw barrels, adjustable and fixed gas systems, iron sights and optics
-Mission application (vehicles, on foot PSD, on foot patrol, static op/lp, QRF, ambush) and adaption.
-Loading/unloading
-Malfunction clearance and IADs
-Barrel changes
-Application of fire on target as a solo gun and in teams
-Rates of fire, bursts, barrel life
After discussing and practicing dry these things I got behind the platforms and we went through a number of drills to get the hands on and a feel for firing them from various positions.
In addition to the 240/249 Buck also brought out his personal PKM and went through the operation of that and we got a chance to shoot it as well. He has done some significant mods to it and it is a nice piece of hardware with quite a bit of weight reduction. Given the opportunity to customize one down range I would really like to set one up similar to his.
I easily reached all the goals I had set for getting familiar with systems and then some. Buck definitely knows his stuff and has the ability to communicate it.
Later in TD 1 we ran some pistol and carbine drills, shooting on the copious amounts of steel on the range and generally having a good time shooting a variety of guns that everyone had brought out including an M203. Buck ran through a run down on the 203 and we all got a chance to shoot quite a bit of training and practice rounds with a little competition to see who could get the most hits on steel at 100m.
Around 1700 we shut down for the day, packed gear, and headed off to clean up and have chow.
The next morning we hit the range again running more time on the guns and get video and photos of specific skills and procedures including running some vehicle down drills.
In addition to another solid day of shooting the 249/240B/203 Buck broke out a M24A1 with AAC (IIRC) can and everyone took turns shooting it as well. I am not much of a precision gun guy, I have one IBA bolt gun, but that SWS was pretty slick. We also rounded out with some more drills and general shooting.
I wan't to say thanks to Buck and Aaron from BRTC, Rob from Tacstrike, Wayneard, Mark S, Mark T, and the rest of the guys that came out. I learned a lot and had a kick ass time.
I hit the road after dinner on the 2nd and didn't get all the files but look for some pics and vids to follow.
In closing, be sure to check out BRTC and the classes they have to offer. The facility is great and the staff are knowledgeable and passionate about the work they do. A great combination.
Pics and Videos:
 |
| From BRTC AAR |
Early in the day, the pile kept growing...
 |
| From BRTC AAR |
Buck running the SAW
 |
| From BRTC AAR |
Rob on the PKM
 |
| From BRTC AAR |
Putting the 203 to work
Vehicle Counter Assault Drill (Static camera)
Vehicle Counter Assault Drill (CAT SAW Gunner helmet cam)
Buck testing out a new machinegunner go
bag from EGGROLL
On the note of steel...
I do not remember how many pieces Rob brought down for us to shoot but I would venture to say that spread across the 5-10 targets we cumulatively put 10-15k rounds (a lot of it being green tip 5.56) on the targets, most of it through the 249. All of them held up extremely well with zero plate penetrations and minimal pock marks.
As you can see in the vids a number of drills put us pretty close with excellent durability on the target side and no splash or spall on the shooter side.
We literally did everything we could with guns and the 203 to try and destroy them and they weathered the storm.
Until next time...
Stay sharp,
Mike
Friday, July 29, 2011
Whew...
It's been a while. It has been pretty busy here at Austere Provisions Company as we work on expanding our product line up from trusted manufacturers as well as work on developing a number of new projects.
Keep an eye out here and on our Facebook page for news. The first item is a morale and mindset patch.
A reminder to yourself and team mates that walking the warrior path is a thinking mans game and the ultimate weapon in dominating your environment is the brain.
This patch stemmed from a group of colleagues I am working with to bring some great new concepts to production to make it easier. Look for more details on this group at a later time.
One of the products that we are in final production with is a 2-1 sling device. I have had this idea on the drawing board since late 2007 - early 2008 time frame. At the time I was working in Iraq doing static security and I spent quite a bit of time in and out of vehicles, checking OP/LPs, walking posts or spending time at ECPs and the like. I preferred a single point sling for the ease of getting the gun on target but a two point was much more comfortable for 'walking the beat' and the combination of an adjustable sling (BFG VCAS or VTAC padded sling) and 'wrapping the gun up' made life easier when going hands on for searches or climbing ladders, etc. Not being satisfied with a one or the other solution I started brainstorming solutions. I came up with a couple of solutions and side lined the project while first getting APC stood up.
Fast forward to December 2010, I discussed this project with Clint Lynch of Sentinel Design and we started working on executing the concept. Below you can see the pre-production short run for testing.
While I am a bit partial I will say that I am really stoked with how this turned out and can't wait to get these on the shelf. The first run is planned to be in FDE (Flat Dark Earth) followed by black as an option in later batches. As depicted in the picture the center hole is for slings with QD connections, the outer holes act both to reduce weight and allow HK hooks or mash hooks to be clipped in should you perform those parts or are using weapons that do not support QD connections. Speaking of weight reduction, the sample shown in the picture is functionally the same weight as a ITW fastex pair (male and female) so you shouldn't notice the extra weight on your sling. While there may be some variation in the production units I don't see it being much more than 0.01 ounce.
Once the first batch is done I will be sure to announce them through all of our channels and have a link to the website for purchase.
As development on other projects and expanding APC has taken quite a bit of time the blog has not had much information put out. Look for that to change, not just with product of the week but other topics of interest. So stay tuned and be sure to hit check out Facebook and the APC website.
Stay sharp,
Mike
Keep an eye out here and on our Facebook page for news. The first item is a morale and mindset patch.
 |
| From Product Releases |
A reminder to yourself and team mates that walking the warrior path is a thinking mans game and the ultimate weapon in dominating your environment is the brain.
This patch stemmed from a group of colleagues I am working with to bring some great new concepts to production to make it easier. Look for more details on this group at a later time.
One of the products that we are in final production with is a 2-1 sling device. I have had this idea on the drawing board since late 2007 - early 2008 time frame. At the time I was working in Iraq doing static security and I spent quite a bit of time in and out of vehicles, checking OP/LPs, walking posts or spending time at ECPs and the like. I preferred a single point sling for the ease of getting the gun on target but a two point was much more comfortable for 'walking the beat' and the combination of an adjustable sling (BFG VCAS or VTAC padded sling) and 'wrapping the gun up' made life easier when going hands on for searches or climbing ladders, etc. Not being satisfied with a one or the other solution I started brainstorming solutions. I came up with a couple of solutions and side lined the project while first getting APC stood up.
Fast forward to December 2010, I discussed this project with Clint Lynch of Sentinel Design and we started working on executing the concept. Below you can see the pre-production short run for testing.
 |
| From Product Releases |
While I am a bit partial I will say that I am really stoked with how this turned out and can't wait to get these on the shelf. The first run is planned to be in FDE (Flat Dark Earth) followed by black as an option in later batches. As depicted in the picture the center hole is for slings with QD connections, the outer holes act both to reduce weight and allow HK hooks or mash hooks to be clipped in should you perform those parts or are using weapons that do not support QD connections. Speaking of weight reduction, the sample shown in the picture is functionally the same weight as a ITW fastex pair (male and female) so you shouldn't notice the extra weight on your sling. While there may be some variation in the production units I don't see it being much more than 0.01 ounce.
Once the first batch is done I will be sure to announce them through all of our channels and have a link to the website for purchase.
As development on other projects and expanding APC has taken quite a bit of time the blog has not had much information put out. Look for that to change, not just with product of the week but other topics of interest. So stay tuned and be sure to hit check out Facebook and the APC website.
Stay sharp,
Mike
Sunday, February 13, 2011
PRODUCT RECALL
Austere Provisions was recently notified of the recall of the "Triad Sterile Lubricating Jelly" that we include in our trauma kits and attached to the nasal airways that we sell. Due to the fact that we provide these as give-aways for courses, charity events, and product demos we are trying to get the word out as far as possible. We will replace the lubricant packet at no cost to the customer/recipient of the kit but we need to know if you still have the kit in hand. So, if you have either an IC3, LMS Comprehensive kit, or individual nasal airway that you purchased from Austere Provisions Company please email me at mike@austereprovisions.com for info on how to receive the replacement.
As of 02/13/2011 any kits or airways leaving the shop were stocked with a replacement equivalent component not effected by the recall.
Detailed information about the recall from the manufacturer:
URGENT MEDICAL DEVICE RECALL
This is to inform you of a product recall involving Sterile Lubricating Jelly manufactured by Triad Group.
This recall has been initiated due to concerns expressed by the Food and Drug Administration regarding the
validation of the gamma radiation sterilization cycles for these products. We are initiating this recall because use
of inadequately sterilized product might result in patient infection.
This recall extends to all Lots of Sterile Lubricating Jelly remaining within their labeled expiration dating (three
years), including all Lot numbers beginning with the digits 7, 8, 9, or 0. We began shipping the Lots of product
subject to this recall in January, 2007
Please immediately examine your inventory and quarantine product subject to recall – any stock of Sterile
Lubricating Jelly manufactured by Triad Group. In addition, if you may have further distributed this product, please
identify your customers and notify them at once of this product recall. Your notification to your customers may be
enhanced by including a copy of this recall notification letter.
This recall should be carried out to the user level. Your assistance is appreciated and necessary to prevent
potential patient harm.
Please complete and return the enclosed response form as soon as possible and return the recalled product to
Triad Group.
If you have any questions please call Triad Group Customer Service Monday through Friday, between the hours
of 8:30 A.M. and 4:00 P.M. Central Time: 262-538-2900 ext 2761.
This recall is being made with the knowledge of the Food and Drug Administration.
Yours truly,
Jack Waterman
Jack Waterman
Regulatory Affairs Manager
__________________________________
Thanks for your patience as we work to correct this issue,
Mike Griffin
Owner
Austere Provisions Company
As of 02/13/2011 any kits or airways leaving the shop were stocked with a replacement equivalent component not effected by the recall.
Detailed information about the recall from the manufacturer:
URGENT MEDICAL DEVICE RECALL
This is to inform you of a product recall involving Sterile Lubricating Jelly manufactured by Triad Group.
This recall has been initiated due to concerns expressed by the Food and Drug Administration regarding the
validation of the gamma radiation sterilization cycles for these products. We are initiating this recall because use
of inadequately sterilized product might result in patient infection.
This recall extends to all Lots of Sterile Lubricating Jelly remaining within their labeled expiration dating (three
years), including all Lot numbers beginning with the digits 7, 8, 9, or 0. We began shipping the Lots of product
subject to this recall in January, 2007
Please immediately examine your inventory and quarantine product subject to recall – any stock of Sterile
Lubricating Jelly manufactured by Triad Group. In addition, if you may have further distributed this product, please
identify your customers and notify them at once of this product recall. Your notification to your customers may be
enhanced by including a copy of this recall notification letter.
This recall should be carried out to the user level. Your assistance is appreciated and necessary to prevent
potential patient harm.
Please complete and return the enclosed response form as soon as possible and return the recalled product to
Triad Group.
If you have any questions please call Triad Group Customer Service Monday through Friday, between the hours
of 8:30 A.M. and 4:00 P.M. Central Time: 262-538-2900 ext 2761.
This recall is being made with the knowledge of the Food and Drug Administration.
Yours truly,
Jack Waterman
Jack Waterman
Regulatory Affairs Manager
__________________________________
Thanks for your patience as we work to correct this issue,
Mike Griffin
Owner
Austere Provisions Company
Sunday, October 24, 2010
Friend or Foe?
How do you tell the difference under low light or no light conditions? How do you prevent a catastrophic incident due to misidentification? Through the use of effective signaling, both passive and active, the chances of incidents like this can be reduced if not prevented.
Passive means include items like IR flags, squares, unit patches, ID patches, etc. Active means include items like this week's product of the week: The Neptune Beacon from CEJAY Engineering. Designed to fill a number of roles in order to reduce the overall load today's warrior has to carry in order to complete the mission at hand.
Information from the manufacturer:
Personal experience:
When I met with Steven Bronson of CEJAY in January of this year at SHOT Show and saw the Neptune I was immediately interested. The Neptune offered all the functionality of the current beacon that I was using (IR, White, Blue flash) with the addition of the constant on and the ability to dim. As well, by using the individual LEDs for each light as opposed to a filter this eliminated white light bleed around the filter. The few full size beacons I had in my inventory from Iraq had all been taped up around the joints of the filter to prevent any white light bleed, functionally preventing easy transition from IR to white/blue. Not to mention the reduction in bulk by going to the Neptune.
While all that seemed great I was still somewhat cautious with using a new unit and even more cautious about recommending this new design to customers and colleagues. Shortly after SHOT I got signed up with CEJAY as a dealer and purchased a small number of Neptunes, integrating them into my training gear and putting them out to some colleagues for evaluation in a variety of conditions. After approximately three months of use in a variety of applications primarily attached to the body armor of full time instructors and combat developers I felt comfortable recommending them.
The unit that I retained for my personal use started life off in a container of water and placed in the on position (blue flash mode) and left in water until the battery died somewhere between day five and six, slightly longer than the rated 100 hours. The unit was removed from the water and exterior dried, battery compartment opened and found to be completely dry. Examination revealed no moisture under lens and battery was replaced revealing normal operation. After this test the unit was attached to my primary plate carrier via a short MALICE Clip (see photos below). While I do like the ability to move the Neptune around with the locking clip, the MALICE Clip offers a more permanent mounting option.
The most recent use of this light was at an EAG/Pat Rogers class in Alliance Ohio where we ran through shoot house evolutions in low light conditions. Myself and my partner ran Neptunes on the rear of our vests in order to identify ourselves to each other and the instructors and safety officers while moving through class. While other students used chem lights which were functional for this application the Neptune offered a reusable and multipurpose solution to this requirement as well as many others such as functioning under NVGs.
A few pics:
Wrist band:
Wrist band in use:
Clip:
MALICE Clip:
MALICE Clip in use:
In addition to identification this light is optimally setup as an emergency signaling beacon. As well, for those that may not need the IR function a training model is available with the same specifications except that the IR LED is replaced with a visible red spectrum LED making it even more well suited for backpackers, adventurers, and the like.
Check back in the next few days, I will be adding these to the website and uploading a video explaining the various functions of the Neptune.
That is all for tonight,
Mike
Passive means include items like IR flags, squares, unit patches, ID patches, etc. Active means include items like this week's product of the week: The Neptune Beacon from CEJAY Engineering. Designed to fill a number of roles in order to reduce the overall load today's warrior has to carry in order to complete the mission at hand.
Information from the manufacturer:
The Neptune beacon is a multi purpose multi function signal light developed to provide the soldier and officer several ID and illumination tools in one compact package. The Neptune light produces a wide, variable-output, flashing or constant on, IR, Blue or White signal. In flashing IR mode, the intense brightness of the Neptune’s signal allows it to be used as either an individual or vehicle Combat ID marker. In Blue or White signal mode, the beacon can be used as either a land or water distress signal.
The Neptune high impact plastic housing and sealed electronics are engineered to withstand harsh environments and chemical exposure. Powered by one CR123A, the Neptune is lightweight, rugged, versatile and submersible to 150 feet making the beacon superbly suited for water to land deployment and special operations applications.
Despite its small size, all Neptune functions can be controlled with one hand even when gloved. The Neptune’s signal is turned ON or OFF simply by rotating the battery cap. The single mode selection button allows the user to select light color and move between flashing or constant on signal mode. Brightness level can also be adjusted in constant on mode, making the light useful as either a signaling device or lamp.
The Neptune can be attached to PALS webbing, belts, or uniform by using the supplied locking spring clip or wrist mounted with the included wrist strap. The light can also be used with optional head/helmet strap for use as a headlamp.
Specifications
Weight: 76 Grams | 2.7 Ounce (with battery)
Size: 49mm x 27mm | 1.9" x 1.06"
Flash Mode: Constant ON with Brightness Control | Fixed Flash
Signal: IR, White, Blue LED
Battery: One CR123A
Coverage: 360 degrees x 180 degrees
Switching: Rotate Battery Cap and Mode Switch
Operating Life: 100 Hours in Flashing signal mode | 8 Hours at maximum brightness in Constant ON signal mode
Environmental: Waterproof 150 feet
Options: Neptune Signal Light (902900)
Personal experience:
When I met with Steven Bronson of CEJAY in January of this year at SHOT Show and saw the Neptune I was immediately interested. The Neptune offered all the functionality of the current beacon that I was using (IR, White, Blue flash) with the addition of the constant on and the ability to dim. As well, by using the individual LEDs for each light as opposed to a filter this eliminated white light bleed around the filter. The few full size beacons I had in my inventory from Iraq had all been taped up around the joints of the filter to prevent any white light bleed, functionally preventing easy transition from IR to white/blue. Not to mention the reduction in bulk by going to the Neptune.
While all that seemed great I was still somewhat cautious with using a new unit and even more cautious about recommending this new design to customers and colleagues. Shortly after SHOT I got signed up with CEJAY as a dealer and purchased a small number of Neptunes, integrating them into my training gear and putting them out to some colleagues for evaluation in a variety of conditions. After approximately three months of use in a variety of applications primarily attached to the body armor of full time instructors and combat developers I felt comfortable recommending them.
The unit that I retained for my personal use started life off in a container of water and placed in the on position (blue flash mode) and left in water until the battery died somewhere between day five and six, slightly longer than the rated 100 hours. The unit was removed from the water and exterior dried, battery compartment opened and found to be completely dry. Examination revealed no moisture under lens and battery was replaced revealing normal operation. After this test the unit was attached to my primary plate carrier via a short MALICE Clip (see photos below). While I do like the ability to move the Neptune around with the locking clip, the MALICE Clip offers a more permanent mounting option.
The most recent use of this light was at an EAG/Pat Rogers class in Alliance Ohio where we ran through shoot house evolutions in low light conditions. Myself and my partner ran Neptunes on the rear of our vests in order to identify ourselves to each other and the instructors and safety officers while moving through class. While other students used chem lights which were functional for this application the Neptune offered a reusable and multipurpose solution to this requirement as well as many others such as functioning under NVGs.
A few pics:
Wrist band:
 |
| From Blog album |
Wrist band in use:
 |
| From Blog album |
Clip:
 |
| From Blog album |
MALICE Clip:
 |
| From Blog album |
MALICE Clip in use:
 |
| From Blog album |
In addition to identification this light is optimally setup as an emergency signaling beacon. As well, for those that may not need the IR function a training model is available with the same specifications except that the IR LED is replaced with a visible red spectrum LED making it even more well suited for backpackers, adventurers, and the like.
Check back in the next few days, I will be adding these to the website and uploading a video explaining the various functions of the Neptune.
That is all for tonight,
Mike
Wednesday, September 15, 2010
Size Matters...
...And bigger isn't always better. Especially when it comes to gear for remote/tactical/austere/etc work. Smaller, more durable, lighter, etc are the characteristics professional adventurers are looking for.
This weeks product of the week lives up to the word compact. The Pocket BVM (manufactured by MicroBVM Systems Ltd.) is an adult Bag Valve Mask that is comparable in size to a couple of combat dressings (H Bandage or OLAES Bandage). Back in the day I would take whatever BVM I could find at a reasonable price and vacuum seal it. This worked OK but had a serious memory effect on the material which left you with about half of the tidal volume that the bag started out with, and often hampered 'bounce back' or reinflation after each respiration. It was an imperfect solution at best but it was what we had 'back in the day'. Now with the medical industry actually interested in providers working outside of the hospital and even the urban street we are starting to see equipment that doesnt take up so much space, and some of it is actually getting lighter.
Some info from the manufacturer:
While I have had this product for some time and been playing with one I dedicated as a demo I have been pleased with the durability. The case is not super tough but at the same time isnt over engineered thus adding unnecessary weight. Outside of the compactness the function is pretty standard of a BVM. It does not include an O2 hose, the green tubing is simply and O2 connection. In order to run O2 to this BVM you would need a double ended push fit section of O2 tubing. To me, this is a major issue as the times I will be using this I will most likely not be carrying an O2 tank and if I am I can spare an extra ounce for the extension tubing.
The valve to mask interface uses standard airway fittings, allowing you to connect to any standard airway device such as an ET Tube, King Tube, Combi-Tube, Trach, etc as well as any standard mask. Although, I have been very happy so far with the mas that is provided. It is flexible and gives good compliance as best I have been able to assess on manikins and living tissue. I have yet to have the opportunity to try one on a respiratory or cardiac arrest patient for myself. Considering that I have swapped out all my old vacuum sealed BVMs for the Pocket BVM, should the need arise (and hopefully it doesnt) I will be able to offer a report back on the function.
And no review would be complete without a few pics:
Diameter at the widest point (the outer ring of the case) is right at 5.25".
Thickness measures in at 2.5".
In comparison to a large OLAES Bandage.
Each component shown comes packed in the case, Mask-Valve-Bag-Reservoir.
In use with the included mask.
In use with a standard ET Tube.
In conclusion, if you need a compact BVM for your remote med bag check out the Pocket BVM from Micro BVM.
Where to get them:
Pocket BVM/Micro BVM now available at Austere Provisions Company
Before I sign off...
It has been a few weeks since a post, hopefully that will not be a trend. In the months leading up to SHOT everyone, including myself are working to get projects done in time for release early next year. I am looking to get out in the field and get some testing done on some survival gear and have an extensive list of tactical training planned for this fall and next year. So look for some great reviews as well as some AARs which I will be posting so customers, friends, and colleagues can keep up with our activities.
Anyway, that is all for tonight, stay sharp,
Mike
This weeks product of the week lives up to the word compact. The Pocket BVM (manufactured by MicroBVM Systems Ltd.) is an adult Bag Valve Mask that is comparable in size to a couple of combat dressings (H Bandage or OLAES Bandage). Back in the day I would take whatever BVM I could find at a reasonable price and vacuum seal it. This worked OK but had a serious memory effect on the material which left you with about half of the tidal volume that the bag started out with, and often hampered 'bounce back' or reinflation after each respiration. It was an imperfect solution at best but it was what we had 'back in the day'. Now with the medical industry actually interested in providers working outside of the hospital and even the urban street we are starting to see equipment that doesnt take up so much space, and some of it is actually getting lighter.
Some info from the manufacturer:
The Pocket BVM TM is Ideal for various emergency and clinical settings where resuscitation and breathing support to the respiratory distressed or non-breathing patient is required along side the space factor.
The Pocket BVM TM when packaged is a pocket sized fully functional BVM.
The Pocket BVM TM will replace any standard BVM by maintaining all the standard working factors and operation possibilities and will improve the use effectiveness by adding the accessibility, availability and last but not least maximize limited storage space by up to 75%.
The Pocket BVM TM advantages and capabilities
- Up to 75% cube space reduction, space efficient
- Textured grip to prevent slippage
- Single Use eliminates cross contamination
- Superior resistance to high/low temperature unaffecting bag re-expansion
- An Endotracheal Tube can be connected to the Resuscitator
- Deflector, see through mask
- Peep valve adaptor can be attached
- Ergonomic cushioned mask design fits securely to facial contours
- Includes Bag, mask, patient valve, reservoir bag, inlet for oxygen drive line
- Two independent Inlet Valves, The Resuscitator has two independent inlets, one for air, and the other for oxygen. When the Resuscitator is attached to an oxygen supply, it enables to Oxygen the patient.
- The Pocket BVM TM is easy to use, without operational fatigue, it requires minimum pressure to be compressed and, due to its design, quickly recovers its shape, so as not to cause operational fatigue, even after extended continuous use.
The Pocket BVM TM can be folded compactly to fit a small storage case. - The Pocket BVM TM Manual Resuscitators has enhanced performance and reliability. All equipment complies with the Safety Standards
While I have had this product for some time and been playing with one I dedicated as a demo I have been pleased with the durability. The case is not super tough but at the same time isnt over engineered thus adding unnecessary weight. Outside of the compactness the function is pretty standard of a BVM. It does not include an O2 hose, the green tubing is simply and O2 connection. In order to run O2 to this BVM you would need a double ended push fit section of O2 tubing. To me, this is a major issue as the times I will be using this I will most likely not be carrying an O2 tank and if I am I can spare an extra ounce for the extension tubing.
The valve to mask interface uses standard airway fittings, allowing you to connect to any standard airway device such as an ET Tube, King Tube, Combi-Tube, Trach, etc as well as any standard mask. Although, I have been very happy so far with the mas that is provided. It is flexible and gives good compliance as best I have been able to assess on manikins and living tissue. I have yet to have the opportunity to try one on a respiratory or cardiac arrest patient for myself. Considering that I have swapped out all my old vacuum sealed BVMs for the Pocket BVM, should the need arise (and hopefully it doesnt) I will be able to offer a report back on the function.
And no review would be complete without a few pics:
 |
| From Blog album |
Diameter at the widest point (the outer ring of the case) is right at 5.25".
 |
| From Blog album |
Thickness measures in at 2.5".
 |
| From Blog album |
In comparison to a large OLAES Bandage.
 |
| From Blog album |
Each component shown comes packed in the case, Mask-Valve-Bag-Reservoir.
 |
| From Blog album |
In use with the included mask.
 |
| From Blog album |
In use with a standard ET Tube.
In conclusion, if you need a compact BVM for your remote med bag check out the Pocket BVM from Micro BVM.
Where to get them:
Pocket BVM/Micro BVM now available at Austere Provisions Company
Before I sign off...
It has been a few weeks since a post, hopefully that will not be a trend. In the months leading up to SHOT everyone, including myself are working to get projects done in time for release early next year. I am looking to get out in the field and get some testing done on some survival gear and have an extensive list of tactical training planned for this fall and next year. So look for some great reviews as well as some AARs which I will be posting so customers, friends, and colleagues can keep up with our activities.
Anyway, that is all for tonight, stay sharp,
Mike
Subscribe to:
Posts (Atom)